IMEI Number
*#06# Cells Identity Code
(IMEI = International Mobile
Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code
(first 2 digits = country code
of the approval-country )
FAC = Final Assembly Code:
(01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)
SNR = Serial Nr.
SP = Spare (always "0")
Software Version
*#0000# shows the
software version
Signal Processing
*3370# - Enchanced full Rate
Codec (EFR) activation. It will
automatically restart.
#3370# - Enchanced full Rate
Codec (EFR) deactivation
*4720# - Half Rate Codec
activation. It will
automatically restart.
#4720# - Half Rate Codec
deactivation
Enchanced Full Rate will give
you much better sound
quality when you enable it.
The new Enhanced Full Rate
CODEC adopted by GSM uses
the ASELP (AlgebraicCode
Excitation Linear Prediction)
compression technology.
This technology allows for
much great voice quality in
the same number of bits as
the older Full Rate CODEC. The
older technology was called
LPC-RPE (Linear Prediction
Coding with Regular Pulse
Excitation). Both operate at
13 kilobits.(but you take up
more space on the network,
so they can charge you
more) - Talk-time is reduced
with about 5%
Sim Clock Stopping
*#746025625#
[*#sim0clock#]
Checks if the sim clock can be
stopped. Sim clock stop is a
kind of stand-by mode
which will save battery time.
This code doesn't work with
software version 4.59.
It will tell you if it can be
stopped or not.
Warrenty Menu
*#92702689# takes you to a
secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and
Year of Manufacture (0997).
3. Displays (if there) the date
where the phone was
purchased (MMYY).
4. Displays the date of the
last repairment - if found
(0000).
5. Makes you capable of
transferring user data if you
have the gear for it.
6. Shows how long the
phone has been used to talk.
This counter is not reset by
when you "clear timers" like
the counters in the call
register.
Bypass the SP lock With a
Nokia
16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of
different provider.
2. Turn on the phone and
press the UP VOLUME key for
3 sec.
Then release it and the
phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until
it disappears and appears
again, then press * one more
time and 04*PIN*PIN*PIN#
Nokia Speed Trap Detector
Urban Legend spread by
Nokia Engineers ;^)
The settings for radar speed
traps detector. Your Nokia
cell phone can be
programmed to pick up radar
speed traps, when
programmed your cell phone
picks up the radar and alerts
you on the message alert
tone. ( Doesn't work with
Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal,
within a few seconds your
phone will display a radar
sign with five zero's next to
it. It is now activated.
Unfortunately only Nokia
phones have this function.
The Cell Phone info display
needs to be de-activated.
Settings -> Phone Settings ->
Cell Info display. Each time
you turn off your phone, or
even each time you loose
contact with your carrier,
you'll have to activate it
again... It is done using steps
1 through 5 above, but the
number (00000) will be
already on the field as a
default.
The James Bond Trick
If you short-circuit the left
middle and right pins on the
bottom of the phone with all
connections touching each
other, the Nokia software
hangs! The profile "Headset"
will be activated. Before you
do this just activate the
"Automatic Answer" in the
headset profile and set the
ringing volume to "Mute".
Now you can use your phone
for checking out what
people are talking about in a
room. Just place it under a
table in a room and call it.
The phone receives the call
without ringing and you can
listen to what people are
saying! Network Monitor
There is a hidden menu
inside your Nokia phone. If
you want to activate it,
you'll have to re-program
some chips inside of your
phone.
Check your software
version. You can only
continue if you have v4.33,
v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL
AT 24C64)
Read out the data with an
EEPROM programmer and
save it to a file (Backup)
If you have v.33 or v4.73,
change the address "03B8"
from "00" to "FF"
If you have v5.24 then
change the address "0378"
from "00" to "FF"
Write the new data to the
EEPROM and solder it back to
the phone
Power on your phone and
you should have
"Netmonitor" enabled.
The Network Monitor gives
you the following
information:
Carrier number, MS RX Level
in DBM, Received signal
quality, MS TX power level, C1
(Path loss criterion, used for
cell selection and
reselection). The range is -99
to 99, RTL (Radio link
timeout), Timeslot,
Indication of the transmitter
status, Information on the
Network parameters, TMSI
(Temporary Mobile
Subscriber Identity), Cell
identification (Cell ID,
Number of cells being used),
MCC (Mobile country code),
MCN (Mobile network code),
LAC (Location area code),
Ciphering (On/Off), Hopping
(On/Off), DTX (On/Off),
Discard cell barred
information.
Game Hacking with Blizzard
Get the file called the
'BlizzardN-GAGE.SIS' from IRC
get in #mediaplace on Efnet
(note: Downloading cracked/
Hacked games is illegal unless
you already own a copy of
game)
The Blizzard Nokia N-Gage
Installer.
1. Unpack Blizzard.sis file
that you get from mIRC
2. Transfer the .sis file to
your N-Gage
3. Get the .blz (N-gage ROM)
from mIRC
4. copy the file to the root
dir of your MMC (16MB
MMC)Multimedia Card
5. Use the Blizzard
application to unpack the .blz
file
6. After unpacking the sonic
icon should appeared in the
MENU
7. Clicked sonic icon and it
should work !
List of compatible games for
the 3650,6600 and the N-
gage that work:
[3650]
SonicN (v.2.5+)
Puyo Pop (v.2.5+)
[6600]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
[N-Gage]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
GSM Network Services
Command Strings
When various network
functions are selected via
the cellphone's menu using
the keypad, the cellphone
automatically generates the
corresponding GSM network
command string and
transmits it to the network.
These commands can
however be manually
entered via the keypad.
Each command is prefixed
with either one or two * or #
characters as follows:
** Register and Activate
* Activate
## De-Register (and
Deactivate)
# Deactivate
*# Check Status
© Call button
Once each command has
been entered, if it is a
network command (as
opposed to a local handset
command) it must be
transmitted to the network
by pressing the YES
(receiver) key which acts as
an enter key - this is
represented here with the ©
character. Always enter
numbers in full international
format +CountryAreaNumber
( e.g. +447712345678).
Command Description
Command String
Security
Change call barring code
**03*OldCode*NewCode*NewCode#©
Change call barring code
**03*330*OldCode*NewCode*NewCode#©
Change PIN code
**04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code
**042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is
entered wrong 3 times)
**05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2
is entered wrong 3 times)
**052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions
##002#©
Set all configured call
diversions to number and
activate **004*number#©
De-register all configured call
diversions (no answer, not
reachable, busy) ##004#©
Unconditionally divert all
calls to number and activate
**21*number#©
Activate unconditionally
divert all calls *21#©
De-register unconditionally
divert all calls ##21#©
Deactivate unconditionally
divert all calls #21#©
Check status of
unconditionally divert all
calls *#21#©
Divert on no answer to
number and activate
**61*number#©
Activate divert on no answer
*61#©
De-register divert on no
answer ##61#©
Deactivate divert on no
answer #61#©
Check status of divert on no
answer *#61#©
Divert on not reachable to
number and activate
**62*number#©
Activate divert on not
reachable *62#©
De-register divert on not
reachable ##62#©
Deactivate divert on not
reachable #62#©
Check status of divert on not
reachable *#62#©
Divert on busy to number
and activate /td>
**67*number#©<
Activate divert on busy
*67#©
De-register divert on busy
##67#©
Deactivate divert on busy
#67#©
Check status of divert on
busy *#67#©
Change number of seconds
of ringing for the given
service before diverting a
call (such as on no answer).
Seconds must be a value
from 5 to 30. De-registering
the same divert will also
delete this change!
**service*number**seconds#©
(Service numbers, see below)
Call barring
Activate barr all outgoing
calls (see Security to set
code) **33*code#©
Deactivate barr all outgoing
calls #33*code#©
Check status of barr all
outgoing calls *#33#©
Activate barr all calls
**330*code#©
Deactivate barr all calls
#330*code#©
Check status of barr all calls /
td> *#330*code#©<
Activate barr all outgoing
international calls
**331*code#©
Deactivate barr all outgoing
international calls
#331*code#©
Check status of barr all
outgoing international calls
*#331#©
Activate barr all outgoing
international calls except to
home country
**332*code#©
Deactivate barr all outgoing
international calls except to
home country #332*code#©
Check status of barr all
outgoing international calls
except to home country
*#332#©
Activate barr all outgoing
calls **333*code#©
Deactivate barr all outgoing
calls #333*code#©
Check status of barr all
outgoing calls *#333#©
Activate barr all incoming
calls **35*code#©
Deactivate barr all incoming
calls #35*code#©
Check status of barr all
incoming calls *#35#©
Activate barr all incoming
calls when roaming
**351*code#©
Deactivate barr all incoming
calls when roaming
#351*code#©
Check status of barr all
incoming calls when roaming
*#351#©
Activate barr all incoming
calls **353*code#©
Deactivate barr all incoming
calls #353*code#©
Check status of barr all
incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting
#43##©
Check status of call waiting
*#43#©
Calling Line Identification
The following only works if
CLIP and CLIR are enabled
(ask your service provider)
CLIP: Presentation of the
number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's
own number to the to the
called party
Activate CLIR **31#©
Activate CLIR for the actual
call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the
actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the
actual number reached (if
number called was diverted
to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the
original number called by the
calling party (if the call was
diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR
*#77#©
Cellphone Services
10 All types of cellphone
services
11 Speech service
12 Data service
13 Fax
14 Datex-J
15 Teletex
16 Short message service
(SMS)
18 All data services without
SMS
19 All cellphone services
without SMS
Carrier Services
20 All services
21 All asynchronous services
22 All synchronous services
23 3.1kHz services
24 Synchronous point-to-
point connections including
PAD's (all synchronous data
services)
25 Asynchronous point-to-
point connections including
PAD's (all asynchronous data
services)
26 Data packet sending
including PAD's (all
synchronous data packet
services)
27 Services with PAD-share
29 Digital connection with
12kbps
GSM Network Service Codes
Note that at present only the
following service codes are
in use:
11 Speech
13 fax
25 data
Cell Broadcast
While Short Message Service
(SMS) can be configured as a
personal service, Cell
Broadcast is a general
service which is designed
for subscribers of a specific
cell or topic. For example, a
subscriber to cell 050 in
England will receive
information on the GSM
tower currently being used
by their phone. This new
concept brings a whole new
meaning to the term mobile
communications as the
phone is now able to receive
information such as share
prices or weather updates
without the need of data
cards and computers. At
present the following
message types exist (note:
this may vary from carrier to
carrier and some carriers
may charge for this service):
Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long Distant Road
Reports
032 Local Road Reports
034 Taxis
040 Weather
050 District
052 Network Information
054 Operator Services
056 Directory Inquiries
(national)
057 Directory Inquiries
(international)
058 Customer Care (national)
059 Customer Care
(international)
In the future one will be able
to control each individual call
by use of the following
service codes. To do this the
user has to insert the service
code in front of the last # in
the MMI command above.
Secret Codes for some Nokia
models
Nokia 9000/9000i
To view IMEI number *#06#
To view Software Version
enter *#8110# Latest
Version is under Phone Info.
To view Week and Year of
manufacture enter *#3283#
Nokia 9110
*#06# for checking the IMEI
(International Mobile
Equipment Identity)
*#0000# shows the SW
version.
Latest software version:
v5.02 (26-08-99)RAE-2
Nokia 7110
*#06# for checking the IMEI
(International Mobile
Equipment Identity)
*#0000# To view Software
Version.
*#3370# - Enhanced Full Rate
Codec (EFR) activation. It will
automatically restart.
*#3370* - Enhanced Full Rate
Codec (EFR) deactivation. It
will automatically restart.
*#4720# - Half Rate Codec
activation. It will
automatically restart
*#4720* - Half Rate Codec
deactivation. It will
automatically restart
*#746025625# - Sim clock
allowed status.
*#92702689#
[*#war0anty#] - takes you
to a secret menu with 6
choices:
1. Displays Serial Number.
2. Displays the Month and
Year of Manufacture (0997)
3. Displays (if there) the date
where the phone was
purchased (MMYY)
4. Displays the date of the
last repairment - if found
(0000)
5. makes you capebel of
transferring user data if you
have the gear for it
6. shows how many hours
the phone has been on
Latest software version:
4.77 25-01-00 NSE-5 - EFR
and half rate codes do not
work with these version.
V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5
Nokia 6190
*#06# for checking the IMEI
(International Mobile
Equipment Identity)
*#6190# shows the SW
version.
*#92772689# (after
removing the analog module)
shows service menu.
*3001#12345[OK] to enter
test mode.
*#639# to change NAM.
Nokia 3810
To view IMEI number *#06#
To view Software Version
enter *#3810#
Nokia 6120 / 6160 / 6162
(TDMA phones)
*#92772689# for checking
ISDN number.
*3001#12345# for field test
mode and nam selection and
some other stuff...
*#9999# shows the SW
version
Nokia 3210 Secret Codes
Nokia 3210
*#06# for checking the IMEI
(International Mobile
Equipment Identity)
Information you get from
the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare
*#0000# To view Software
Version.
#746025625#
[*#sim0clock#]
Checks if the sim clock can be
stopped. Sim clock stop is a
kind of stand-by mode
which will save battery time.
This code doesn't work with
software version 4.59.
*#92702689#
[*#war0anty#] takes you to
a secret menu with 6
choices:
1. Displays Serial Number.
2. Displays the Month and
Year of Manufacture (0997)
3. Displays (if there) the date
where the phone was
purchased (MMYY)
4. Displays the date of the
last repairment - if found
(0000)
5. makes you capebel of
transferring user data if you
have the gear for it
6. shows how many hours
the phone has been on
Latest software version: V
5.02 NSE-8/9
*#3370# - Enhanced Full Rate
Codec (EFR) activation. It will
automatically restart.
*#3370* - Enhanced Full Rate
Codec (EFR) deactivation. It
will automatically restart.
*#4720# - Half Rate Codec
activation. It will
automatically restart
*#4720* - Half Rate Codec
deactivation. It will
automatically restart
Enhanced Full Rate will give
you much better sound
quality when you enable it.
The new Enhanced Full Rate
CODEC adopted by GSM uses
the ASELP (Algebraic Code
Excitation Linear Prediction)
compression technology.
This technology allows for
much great voice quality in
the same number of bits as
the older Full Rate CODEC. The
older technology was called
LPC-RPE (Linear Prediction
Coding with Regular Pulse
Excitation). Both operate at
13 kilobits.(but you take up
more space on the network,
so they can charge you
more) - Talk-time is reduced
by about 5% when using the
ERF option.
Showing 3 of 47 threads for
this page - view all
(what's this?)
Nokia All Codes
Scroll Down to view
Specific Model
Numbers!!!!
Or More
No comments:
Post a Comment